NEC Electra Elite IPK II Features And Specifications Manual page 122

Document Revision 1
r Call Forwards can be chained allowing calls to forward from one extension to the next. Up
to 32 extensions can be linked in a call forward chain.
Periodic reminder message requires a DSP daughter board for Voice Response System
r
(VRS).
r Call Forwarding an extension in a Department Group will prevent that extension from
receiving Department Pilot Calls.
r Ring Groups do not follow Call Forward to voice mail.
r Call Forward Split does not allow for Call Forward with Follow Me.
If Call Forwarding off premise, a trunk access code must be included in the forwarding
r
number.
r Call Forward with Follow Me allows for a single station to set follow me for multiple stations.
When canceling Call Forward with Follow Me, the use must specify the station to cancel or
cancel all.
The terminal must be in an idle state to enable call forwarding with a Programmable
r
Function Key, or receiving dial tone to enable call forwarding with a service code.
r Call Forward for any Extension to Destination can not be set or canceled from a Virtual
Extension.
r Call Forwarding/Do Not Disturb Override allows for Overriding a Call Forwarding or DND
setting at another extension.
When a call is transferred because of Call Forwarding No Answer, Call Forwarding Busy, or
r
DND, the Reason for Transfer option can display to the transferred extension why the call is
ringing to their telephone.
r An extension user can forward their calls to a Department number.
r A DSS key will indicate a Call Forwarding indication for extensions forwarded with
Immediate Call Forwarding.
r Calls to extensions with DND active do not follow Call Forwarding programming. DIL calls
will ring an idle Department Group member, then follow 22-08 programming then 22-05
programming.
r Function keys simplify Call Forwarding operation.
Default Setting
Enabled
2 - 100
Electra Elite IPK II
Call Forwarding