NEC Electra Elite IPK II Features And Specifications Manual page 450

Document Revision 1
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Programming
15-02-08 Multiline Telephone Basic Data Setup - Automatic Handsfree
Use this option to set whether pressing a key accesses a One-Touch Key (1) or if it pre-selects
the key (0).
15-02-16 Multiline Telephone Basic Data Setup - Handsfree Operation
Enable (1) or disable (0) an extensions ability to use the speakerphone on outside calls. When
disabled, users can hear the conversion, but cannot respond handsfree.
20-06-01 Class of Service for Extensions
Assign Class of Service (1~15) for extensions.
20-02-12 System Options for Multiline Telephones - Forced Intercom Ringing
Use this option to enable (1) or disable (0) Forced Intercom Ringing. If enabled, incoming
Intercom calls normally ring. If disabled, Intercom calls voice-announce.
20-09-05 Class of Service Options (Incoming Call Service) - Setting Handsfree Answerback or
Forced Intercom Ringing
Allow (1) or prevent (0) an extension form enabling Handsfree Answerback or Forced Intercom
Ringing for their incoming intercom calls.
2 - 428
Electra Elite IPK II
Handsfree and Monitor