NEC Electra Elite IPK II Features And Specifications Manual page 322

Document Revision 1
22-01-04 System Options for Incoming Calls - DIL No Answer Time
Set the DIL No Answer Time (0~64800 seconds). If DIL Delayed Ringing is set in program
22-08, this option sets the DIL Delayed Ring interval.
22-02-01 Incoming Call Trunk Setup
Assign each DIL Service Type 4. Make an entry for each Night Service mode.
22-04-01 Incoming Extension Ring Group Assignment
Assign the extensions that should receive the overflow to the ring group programmed in 22-08.
Set the ringing in Program 22-06.
0 = Trunks Do Not Ring [just flash line keys]
1 = Trunks Ring
22-07-01 DIL Assignment
Set the destination extension number for each DIL - for each Night Service mode. The
destination can be an extension port, virtual extension number, or Department Group pilot
number (as assigned in 11-07-01).
22-08-01 DIL/IRG No Answer Destination
For each DIL with delayed ringing, enter the DIL No Answer Ring Group. An unanswered DIL
rings this group after the DIL No Answer Time. Make an entry for each Night Service mode.
Ring Groups: 1~100
Operation
To answer a call on your Direct Inward Line:
1. Lift the handset.
2. On the multiline terminal, press the flashing line key for DIL.
Pressing the flashing Answer key will put the first call on hold and answer the second incoming call. This
N
can be repeated until all incoming calls are answered.
If you have Ringing Line Preference, lifting the handset answers the call.
N
If you do not answer the call, it may ring other extensions (i.e., the DIL No Answer Ring Group).
N
2 - 300
Electra Elite IPK II
Direct Inward Line (DIL)