NEC Electra Elite IPK II Features And Specifications Manual page 231

Electra Elite IPK II
20-13-20 Class of Service Options (Supplementary Service) - Account Code/Toll Restriction
Operator Alert
When toll restriction is violated, determine if the operator should be notified.
Operator Alert:
0 = Disable
1 = Enable
21-01-10 System Options for Outgoing Calls - Dial Digits for Toll Restriction Path
If this option is programmed with an entry other than "0", a call will not have a talk path unless
the user dials at least the number of digits entered in this option when placing an outgoing call.
This means that an entry of 4 or higher in this program will cause a problem when dialing 911.
Since it is only a 3-digit number, the call will not have a talk path, preventing the emergency
dispatcher from hearing the caller. It is recommended that this option be kept at its default
setting of "0" to prevent any problems with dialing 911. If the system detects the call is
answered, by detecting Reversal in analog trunks, this restores both way voice paths
immediately.
21-01-15 System Options for Outgoing Calls - Outgoing Disable on Incoming Line
Enable (1) or disable (0) the Outgoing Disable on Incoming Line feature.
21-01-16 System Options for Outgoing Calls - Supervise Dial Detection Timer
With the Outgoing Disable on Incoming Line feature, if dial tone is not detected after the
extension answers an incoming line, the system determines the call is unable to complete and
releases the DTMF receiver (0~64800 seconds).
21-01-17 System Options for Outgoing Calls - Restriction Digit in Outgoing Disable on Incoming
Line
With the Outgoing Disable on Incoming Line feature, determine the number of digits (0~9) to be
dialed before the call should be disconnected.
21-04-01 Toll Restriction Class
For each extension, assign a Toll Restriction Class for each Night Service mode.
21-05-01 Toll Restriction Class - International Call Restriction Table
For the Toll Restriction Class you select, enable (1) or disable (0) the International Call Restrict
Table (Program 21-06-01).
21-05-02 Toll Restriction Class - International Call Permit Table
For the Toll Restriction Class you select, enable (1) or disable (0) the International Call Permit
Table (Program 21-06-02).
21-05-04 Toll Restriction Class - Maximum Number of Digits Table Assignments
For the Toll Restriction Class you select, disable (0) or enable (1) the dialing limit for calls. When
enabling, select from entries 1~4 in Program 21-06-03.
21-05-05 Toll Restriction Class - Common Permit Code Table
For the Toll Restriction Class you select, enable (1) or disable (0) the Common Permit Code
Table (Program 21-06-04).
Code Restriction
Document Revision 1
2 - 209