Electra Elite IPK II
Programming
15-07-01
Programmable Function Keys
Assign the functions of a multiline terminal's Programmable Function Keys. When using
Program 15-07-01 to program the function keys 17-32 on the D16(LD)-R ADM start with key 17.
Service codes 751 and 752 can also be used to program these keys.
15-20-01
LCD Line Key - Name Assignment
The name can be entered using the dial pad keys 1~32.
20-06-01
Class of Service for Extensions
Assign Class of Service (1~15) to extensions.
20-07-10
Class of Service Options (Administrator Level) - Programmable Function Key
Programming (Appearance Level)
In an extension's Class of Service, enable (1) or disable (0) an extension's ability to program
their own function keys using service code 752.
When programming a feature as a Programmable Function Key,, refer to PGM 15-07-01 in the Electra
Elite IPK II Programming Manual.
Operation
To change a 2-digit programmable key:
1.
Press the Speaker key.
2.
Dial 751 for 2-digit codes.
3.
Press the key you want to program.
4.
Enter the 2-digit key function, any additional information needed for the key and press Hold.
For available functions codes refer to PGM 15-07 in the Electra Elite IPK II Programing Manual.
To undefine a key, enter 00.
To change a 3-digit programmable key:
1.
Press the Speaker key.
2.
Dial 752 for 3-digit codes.
3.
Press the key you want to program.
Programmable Function Keys
Document Revision 1
2 - 681