NEC Electra Elite IPK II Features And Specifications Manual page 735

Electra Elite IPK II
20-08-09 Class of Service Options (Outgoing Call Service) - Hotline/Extension Ringdown
In an extension's Class of Service, Enable (1) or Disable (0) Hotline (Ringdown). If disabled in
Class of Service, the settings in Program 21-11 below have no effect.
21-01-09 System Options for Outgoing Calls - Hotline Call Start Timer
After the user lifts the handset, the extension automatically calls the ringdown destination after
this interval (0~64800 seconds). A setting of '0' will immediately ring the programmed extension.
Any other setting will delay the ringdown the number of seconds programmed.
21-11-01 Extension Ringdown (Hotline) Assignments
Program the ringdown (Hotline) source and destination (target) number, up to 24 digits (512
Hotline assignments). Remember to include the trunk access code (usually 9) in front of the
number when dialing outside numbers. When programming Speed Dial – System numbers as
the destination, the entry should be 753 + bin number (the service code for Speed Dialing and
the Speed Dial bin number).
Operation
To place a call if your extension has ringdown programmed:
1. Lift the handset.
If you want to place a trunk call, press a line key before lifting the handset.

Depending on the setting of your ringdown timer, you may be able to dial an Intercom call before your ringdown

goes through.
If the destination has Handsfree Answerback enabled, your call will voice announce. If the destination has

Forced Intercom Ringing enabled, your call will ring.
To answer a call if you are another extension's ringdown destination:
1. Speak toward telephone to answer incoming voice-announcement.
- OR -
Lift the handset or press the Speaker key to answer ringing Intercom call.
Ringdown Extension, Internal/External
Document Revision 1
2 - 713