NEC Electra Elite IPK II Features And Specifications Manual page 174

Document Revision 1
15-07-01 Programmable Function Keys
Assign an Outgoing Call Without Caller ID (ISDN) function key (63) or a Caller ID Log History
key (08) if needed.
20-01-03 System Options - DSP Sender Resource Selection
Set the DSP Sender Resource Selection to "1" (Caller ID Sender) when using the Caller ID
Sender Queuing feature.
20-02-08 System Options for Multiline Telephones - LCD Display Holding Time
This timer determines how long a user's display will show Caller ID for a second incoming call
(0~64800 seconds).
20-06-01 Class of Service for Extensions
Assign Class of Service (1~15) to extensions.
20-08-15 Class of Service (Outgoing Call Service) - Block Outgoing Caller ID
Allow (1) or prevent (0) a user's Class of Service from automatically blocking outgoing Caller ID
information when a call is placed. If allowed (i.e., block enabled), the system automatically
inserts the Caller ID block code *67 (defined in Program 14-01-21) before the user dialed digits
(this requires Program 14-02-10 to be enabled). If prevented (i.e., block disabled), the system
outdials the call just as it was dialed by the user.
20-09-02 Class of Service Options (Incoming Call Service) - Caller ID Display
In an extension's Class of Service, enable (1) or disable (0) the extension's ability to display
incoming Caller ID name/number information.
This is disabled at default.

20-09-04 Class of Service Options (Incoming Call Service) - Notification of Incoming Call List
Existence
Determine whether or not the CHECK LIST message is displayed to indicate a missed call
(0 = Off, 1 = On).
Class of Service Options (Supplementary Service) Automatic Off-Hook Signal
20-13-06
In order for a display telephone to show Caller ID information for a second incoming call, this
assignment must be enabled (1).
20-19-01 System Options for Caller ID - Caller ID Display Formatting
Determine whether the first 10 digits (0) or last 10 digits (1) should be displayed when Caller ID
exceeds 12 digits.
20-19-02 System Options for Caller ID - Caller ID Wait Timer
Determine how long an incoming CO call should wait for Caller ID information from Telco before
the system connects the call.
20-19-03 System Options for Caller ID - Edit Caller ID
Enable (1) or disable (0) the system's ability to add the trunk access code to the stored Caller ID
information. If Caller ID Edit Mode is disabled (0), no trunk access code will be added to the
Caller ID. If this option is enabled (1), the trunk access code entered in Program 10-02-05 will be
added to the beginning of the Caller ID.
2 - 152
Electra Elite IPK II
Caller ID