NEC Electra Elite IPK II Features And Specifications Manual page 648

Document Revision 1
∗
at busy or busy/ring to signal the extension. If enabled (blocked), nothing happens when the
∗
caller dials to off-hook signal.
Block Camp On
J
If an extension has Block Camp On enabled, callers to the extension cannot dial 2 to Camp On
after hearing busy or busy/ring. If the extension has Block Camp On disabled, callers are not
prevented from dialing 2 to Camp on after hearing busy or busy/ring. This is set in the called
extension's Class of Service.
Conditions
r An extension user cannot Camp On to a busy extension or leave a callback if Off-Hook
Signaling has already gone through. Off-Hook Signaling allows an extension to block a
caller's ability to dial # to camp on.
You cannot send off-hook signals to an extension busy on a Handsfree (Speakerphone)
r
call. The called extension's large LED flashes fast, with no ringing.
r The setting of Program 20-13-06 affects the BLF display for Hotline and Reverse Voice
Over. Refer to Hotline and Reverse Voice Over features for additional information.
r You cannot send off-hook signals to an extension that is already receiving a voice
announcement.
An extension user can store the Off-Hook Signaling Service Code (709) under a One-Touch
r
Key to provide quick Off-Hook Signaling access.
Single line telephones can only send off-hook signals.
r
An extension set as Operator in 20-17-01 does not follow settings in 20-13-05, 20-13-06 or
r
20-09-07 and will always receive off hook signaling.
Program 20-09-07 and 20-13-06 must be set to "1" in class of service for a normal
r
extension to receive automatic Off-Hook Signaling.
Default Setting
Enabled
System Availability
Terminals
All Multiline Terminals
2 - 626
Electra Elite IPK II
Off-Hook Signaling