NEC Electra Elite IPK II Features And Specifications Manual page 301

Electra Elite IPK II
Single Line Telephone
1. Lift the handset and dial
If you are at a co-worker's telephone, you can dial the Voice Mail master number and your mailbox number

instead. You can also use this procedure from your own telephone to call a co-worker's mailbox.
2. If requested by Voice Mail, enter your security code.
Checking Messages
If 15-02-26 = 0 (Message Key):
1. Press the Message key once.
The user can use the VOL UP and VOL DOWN keys to view the new messages. If there are both voice mail

messages and Message Waiting calls, the display indicates the number of new voice mail messages and then
each Message Waiting call is shown.
When there are new messages, the MW LED on the telephone will flash red.

2.
To return a displayed Message Waiting,
key or lift the handset.
To listen to the voice messages,
second time, press the Speaker key or lift the handset.
The voice mail is called.

The voice mail is only called if there are new messages. If the display indicates "Check Messages No Messages",

then press the Exit key to return the telephone to an idle condition.
If 15-02-26 = 1 (Voice Mail Key):
1. Press the Message key once.
The voice mail is called.

When there are new messages, the MW LED on the telephone will flash red.

With this option set, the MSG key can be used as a Voice Mail key for any function (calling voice mail or transfer

call a to voice mail [HOLD + MSG + Extension Number], etc.).
Leaving A Message (Multiline Terminal Only)
To leave a message in the mailbox of an unanswered extension: (the extension you call can be busy, in
DND or unanswered)
1. Press Voice Mail key (PGM 15-07 or SC 751: code 77)
- OR -
Dial 8.
The Voice Mail system will prompt you to leave a message.

Digital Voice Mail
∗
8.
press the Message key a second time, press the Speaker
with "Voice Message" displayed, press either the Message key a
Document Revision 1
2 - 279