NEC Electra Elite IPK II Features And Specifications Manual page 928

Document Revision 1
Related Features
Call Queuing
Call Arrival Keys (CAR)
Secondary Incoming Extension
Programming
11-04-01 Virtual Extension Numbering
Assign Extension Number for the Virtual Extensions (1~256).
15-01-01 Basic Extension Setup – Extension Name
Assign Names for the Virtual Extensions (1~256).
15-02-21 Multiline Telephone Basic Data Setup – Virtual Extension Access Mode
Determine whether an extension's Virtual Extension Key should be used as a DSS key to the
extension and for receiving calls (0), answering incoming calls and ability to place outgoing ICM
or CO calls (1), or just receiving incoming calls (2). If the key is to be used for outgoing calls, the
extension number of the key must be a real extension or virtual extension number. When the
extension number of the key is a real extension number, when the key is pressed, the real
extension cannot be used.
15-02-30 Select Toll Restriction Class VE or Real Extension
Assign if the phone will use the Toll Restriction class of the VE (0) or the Real Extension when
making outbound calls from the VE.
15-07-01 Function Keys
Assign Virtual Extension function keys on Multiline telephones (code *03 + extension number).
15-08-01 Incoming Virtual Extension Ring Tone Setup
Assign a ring tone (0-4) to each extension port and virtual extension port assigned to a Virtual
Extension key. If ringing is enabled for the key in Program 15-09-01, the key rings with the tone
set in this program.
15-09-01 Virtual Extension Ring Assignment
Individually program an extension's Virtual Extension key(s) to either ring (1) or not ring (0).
15-10-01 Virtual Incoming Extension Ring Tone Order Setup
Set the priority (1-4) for the Virtual Extensions' Ring Tones set in Program 15-08-01. When
simultaneous Virtual Extension calls ring an extension, the tone with the highest priority (e.g., 1)
rings and the other keys will just flash.
2 - 906
Electra Elite IPK II
Virtual Extensions