NEC Electra Elite IPK II Features And Specifications Manual page 502
Hide thumbs
Also See for Electra Elite IPK II:
- User manual (1190 pages) ,
- System hardware manual (642 pages) ,
- Programming manual (617 pages)
Table of Contents
Advertisement
Document Revision 1
Example Configuration 3 - Static IP Addressing, Routed LAN:
This example shows System IP Phones connected to an Elite IPK II over a Wide Area Network (WAN)
with static addressing. This is a typical scenario - a small branch office connecting to an Elite IPK II at
the main office.
IPK II CPU:
VoIP MG16:
Subnet Mask:
Default Gateway: 192.168.1.254
IP Phone 1/100
192.168.2.200
Programming - IPK II CPU
1.
10-12-01 IPK II CPU Network Setup - IP Address = 192.168.1.20
2.
10-12-02 IPK II CPU Network Setup - Subnet Mask = 255.255.255.0
3.
10-12-03 IPK II CPU Network Setup - Default Gateway = 192.168.1.254
2 - 480
IPK II CPU
VoIP MG16
192.168.1.20
192.168.1.21
255.255.255.0
IP Phone 1/101
192.168.2.201
Figure 2-5 Example - Static IP Addressing, Routed WAN
Electra Elite IPK II
Switch/Hub
192.168.1.254
192.168.2.254
Switch/Hub
IP Station (MEGACO) - MG 16
Router
WAN
(Leased line,
Frame Relay,
etc.)
Router
Advertisement
Table of Contents
