Off-Hook Signaling - NEC Electra Elite IPK II Features And Specifications Manual

Description
The signal is an off-hook ringing over the idle (second) line appearance. Off-Hook Signaling
helps important callers get through, without waiting in line for the called extension to become
free. The system provides the following off-hook Signaling options:
Called Extension Block
J
The called extension's Class of Service may block incoming Off-Hook Signaling
attempts. This is beneficial to users that do not want interruptions while on a call.
Automatic Signaling
J
Calling a busy extension automatically initiates Off-Hook Signaling. This option is useful
to receptionists, operators and others that must quickly process calls. This is set in the
called extension's Class of Service.
Manual Signaling
J
After reaching a busy extension, manual signaling gives the caller the choice of using
off-hook Signaling or activating other features. Extension's without automatic signaling
have manual signaling. The users can dial a service code or press a Programmable
Function Key to send Off-Hook Signaling to the called telephone.
Selectable Off-Hook Signaling Mode
J
The Off-Hook Signal can be muted ringing, no off-hook ringing or a beep in the handset
- based on the caller's programming.
Off-Hook Ringing
J
Use this option to enable or disable an extension's Off-Hook Signaling for incoming
calls. If enabled, Off-Hook Signaling occurs normally. If disabled, calls queue behind the
extension's busy line appearance and the user gets no Off-Hook Signaling indication.
The second line appearance stays idle. The caller hears ringback tone while their call
waits. This is set in the called extension's Class of Service.
DID Call Waiting
J
An extension can optionally have DID calls camp on with Off-Hook/Call Wait signaling,
without Off-Hook/Call Wait signaling or no signaling. This is set in the called extension's
Class of Service.
Block Manual Off-Hook Signals
J
This Class of Service option enables/disables a busy extension's ability to block off-
hook signals manually sent from a co-worker. If disabled (not blocked), callers can dial

Off-Hook Signaling

Off-Hook Signaling
O
2 - 625