Electra Elite IPK II
To listen to a previously recorded VRS message:
1.
Press the Speaker key or lift the handset.
- OR -
At a single line telephone, lift the handset.
2.
Dial 616.
3.
Dial 5 (
isten).
L
4.
Dial the VRS message number to which you want to listen (01~48).
You will hear the previously recorded message. If you hear a beep instead, there is no previous message
recorded.
5.
Press # to hear the message again.
- OR -
To hear another message, press 5 and then enter the message number (01-48).
- OR -
Hang up.
To erase a previously recorded VRS message:
1.
Press the Speaker key or lift the handset.
- OR -
At a single line telephone, lift the handset.
2.
Dial 616.
3.
Dial 3 (
rase).
E
4.
Dial the number of the VRS message you want to erase (01~48).
5.
Press the Hold key (multiline terminal only) to cancel the procedure without erasing (and return to
step 3).
- OR -
Hang up to erase the message.
To record, listen to or erase a VRS message if you call in using DISA:
1.
Place call to the system.
You will hear dial tone.
2.
After the system answers, dial the DISA password (normally 000000).
You will hear dial tone.
3.
Dial 616 and the VRS password.
Voice Response System (VRS)
Document Revision 1
2 - 957