NEC Electra Elite IPK II Features And Specifications Manual page 901

Electra Elite IPK II
20-13-06 Class of Service Options (Supplementary Service) - Automatic Off-Hook Signaling"
In an extension's Class of Service, allows (1) or denies (0) automatic off-hook signaling. Set to
0 when 16-01-03 is set to Circular (hunt).
20-13-14 Class of Service Options (Supplementary Service) - Uniform Call Distribution
In an extension's Class of Service, allow (1) or prevent (0) extensions from receiving
Department Calls when the pilot number is dialed.
22-02-01 Incoming Call Trunk Setup
If you want a trunk to be a DIL to a Department Group, assign Service Type 4 for each Night
Service Mode. Also see PGM 22-07-01.
22-07-01 DIL Assignment
For each trunk assigned Service Type 4 in 22-02 above, assign the DIL destination as the
Department Group pilot number (as assigned in Program 11-07-01). (Department: Groups
1~64)
24-02-05 System Options for Transfer - Transfer to Busy Department Group Recall Timer
After a trunk is unscreen transferred to a busy Department Group, this timer will start. If the call
is not answered, it will recall the originator. Determine how long the call should ring before
recalling (0~64800 seconds).
24-02-08 System Options for Transfer - Delayed Transfer Timer for All Department Groups
Determine how long a call should ring a Department Group before transferring the call (0~64800
seconds).
24-05-01 Department Group Transfer Target Setup
Assign the Abbreviated Dialing bin to each Department Group to hold the destination for the
immediate automatic transfer of ICM and transferred calls to the Department Group feature.
Operation
To call a UCD Group:
1. At the multiline terminal, press the Speaker key.
- OR -
At single line telephone, lift the handset.
2. Dial the UCD group (department) extension or pilot number.
The system routes the call to the first free telephone in the (UCD group) department.

Uniform Call Distribution (UCD)
Document Revision 1
2 - 879