NEC Electra Elite IPK II Features And Specifications Manual page 785

Electra Elite IPK II
3. Dial the System Speed Dialing storage code.
Unless you preselect, Trunk Group Routing selects the trunk for the call. The system may optionally select a

specific Trunk Group for the call.
If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored number.

To store a System Speed Dialing number under a Programmable Function Key:
1. At multiline terminal, press the Speaker key.
2. Dial 751.
3. Press the key where the number is to be stored.
4. Dial 27.
5. Dial System Speed Dial Bin number to put under the key.
6. Press Speaker to hang up.
To dial a System Speed Dialing number under a Programmable Function Key:
1. At the multiline terminal, press the Speaker key.
2. Press the key, which has the stored number to be dialed.
The number seizes an outside line and dials out.

To dial a Group Speed Dialing number:
1. Go off-hook.
2. Press the Redial key.
- OR -
3. Press the Group Speed Dialing key (PGM 15-07-01 or SC 751: 28).
To preselect, press a line key in step 1 (instead of Speaker) before pressing the Redial or Speed Dialing key).

4. Dial the Group Speed Dialing code.
The stored number dials out.

Unless you preselect, Trunk Group Routing selects the trunk for the call.

If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored number.

To check your stored Speed Dialing numbers (display telephone only):
1. Press Help.
2. For System Speed Dialing, press the Redial key.
Dial the Speed Dialing Code (e.g., common code 001).
If the entire stored number is too long for your telephone's display, press

- OR -
Speed Dial - System/Group/Station
Document Revision 1
to see the rest of it.
,
2 - 763