NEC Electra Elite IPK II Features And Specifications Manual page 866

Document Revision 1
Related Features
Barge-In
Call Waiting/Camp-On
Caller ID
Call Forwarding
Conference
Meet Me Paging Transfer
One-Touch Calling
Serial Call
Quick Transfer to Voice Mail
Programming
11-12-58 Service Code Setup (for Service Access) - Transfer into Conference
Use this program to assign the code users dial to Transfer a call into a Conference call. This
code is normally 624.
11-15-09 Service Code Setup Administrative (for Special Access) - Transfer to Trunk Ring Group
Code
When a call is transferred using this service code, it's transferred to the ring group destination for
that incoming trunk. For example, trunk 2 is in Ring Group 4. When the call is transferred using
this service code, the trunk will ring all extensions programmed for Ring Group 4 or ring the
External Paging Group for Ring Group 4, depending on how the system is programmed.
15-07-01 Programmable Function Keys
Extension users may want a function keys programmed for Transfer (code 06).
15-02-05 Multiline Telephone Basic Data Setup - Transfer Key Operation Mode
Use this option to set the operating mode of the extension's Conf key. The keys can be for Call
Transfer (0), Serial Calling (1) or Flash (2). When selecting the Flash option, refer also to
Programs 81-10-07 and 81-10-08.
2 - 844
Electra Elite IPK II
Transfer