NEC Electra Elite IPK II Features And Specifications Manual page 438

Document Revision 1
Related Features
Central Office Calls, Placing
Programming
11-10-26 Forced Trunk Disconnect
Assign the Service Code.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
20-07-11 Class of Service Options (Administrator Level) - Forced Trunk Disconnect
In an extension's Class of Service, enable (1) or disable (0) the ability to use Forced Trunk
Disconnect.
Operation
To disconnect a busy trunk:
Multiline Terminal
1. Press line key for trunk.
- OR -
Dial trunk access code (#9 + trunk number).
You hear busy tone. Trunk numbers are 001~200.

2. Dial the Service Code (not set at default).
You hear confirmation beeps as the system disconnects the trunk.

You can now place a call on the free trunk.

3. Press the line key for the trunk disconnected in Step 2.
- OR -
Dial the trunk access code (#9 + trunk number) for the trunk disconnected in Step 2.
2 - 416
Electra Elite IPK II
Forced Trunk Disconnect