Warning Tone For Long Conversation - NEC Electra Elite IPK II Features And Specifications Manual

Warning Tone For Long Conversation

Description
The system can broadcast warning tones to a trunk caller warning them that they have been
on the call too long. The tones are just a reminder -- the user may be able to disregard the
tones and continue talking if they choose. The outside caller does not hear the warning
tones. In addition, warning tones do not occur for Intercom calls and most incoming trunk
calls. DISA trunks can also have warning tones. Warning tones are not available to analog
single line telephone (SLT) users.
There are two types of warning tones: Alarm Tone 1 and Alarm Tone 2. Alarm Tone 1 is the
first set of tones that occur after the user initially places a trunk call. Alarm Tone 2
broadcasts periodically after Alarm Tone 1 as a continued reminder. Each alarm tone
consists of three short beeps.
If programmed, DISA calls will be disconnected unless the "continue" code is entered by the
user. With the Long Conversation Cutoff feature, incoming or outgoing central office calls can
also be disconnected.
Warning Tone for DISA Callers
For DISA callers, with this feature enabled, the warning tone timer begins when an incoming
DISA call places an outgoing call and either the inter-digit timer expires or the outgoing call is
answered.
If an outside call is transferred to forwarded off-premise using an outside trunk, the warning
tone timer begins immediately. This will occur only if either trunk involved in the call is
programmed for this feature (Program 14-01-17). When transferring a trunk call off-premise,
Program 14-01-13 must be enabled (set to '1').
Conditions
r Warning Tone for Long Conversation does not occur for incoming trunk calls.
r Warning Tone for Long Conversation occurs for all outgoing trunk calls,
regardless of how they are placed or other outgoing restrictions.
r Warning Tone for Long Conversation can be enabled for DISA calls.
r Warning Tone for Long Conversation does not occur for Intercom calls.
Warning Tone for Long Conversation can be used with the Long Conversation
r
Cutoff feature for outgoing calls.
Warning Tone For Long Conversation
W
2 - 963