NEC Electra Elite IPK II Features And Specifications Manual page 253

Electra Elite IPK II
To Transfer a Call into a Conference:
1. While on a call, press the Hold key.
2. Dial the Transfer to Conference service code (default = 624).
If the telephone does not have the proper COS, a warning tone is sent. After the user hangs up, the system will

automatically place a Callback to the extension.
The display shows the line Number, Number/Name and Extension Name/Number.

3. Dial the extension number or press a DSS key of a telephone within a Conference call.
If an error tone is heard, Barge-In is not enabled for the extension and the call will not go through. Retrieve the

call by pressing the flashing line or Call Appearance (CAP) Key or hang up and the call will recall the extension.
When the call is transferred into the Conference, an intrusion tone is heard by all parties in the conference,

depending on the entries in Program 20-13-17 and Program 80-01, and all display multiline terminals will show
the joined party.
To cancel the transfer, press the flashing line or Call Appearance (CAP) Key to retrieve the call.

4. Hang up.
Break Up the Conference But Retain the Trunk Calls:
1. While on an active Conference call, press Hold.
2. Select the line or Call Appearance (CAP) Key of the caller you wish to talk to.
Any intercom calls which were involved in the Conference will be disconnected.

Dropping a Party From the Conference:
1. While on an active Conference call, press the line/Call Appearance (CAP) Key of the party to
retain. This action will retain any intercom calls involved in the Conference.
Conference
Document Revision 1
2 - 231