Table 2-15 Hardware/Software Requirements For Running Webpro - NEC Electra Elite IPK II Features And Specifications Manual

Document Revision 1
Table 2-14 Hardware/Software Requirements for Running PCPro (Continued)
TCP Port
Screen Resolution
r The hardware/software requirements for the host PC running WebPro are:

Table 2-15 Hardware/Software Requirements for Running WebPro

Browser
Network
Screen Resolution
r Only one PCPro/WebPro/Handset can be programming the switch at any one time.
When programming via WebPro/PCPro, some data requires you to logout before the switch
r
will fully apply the changes. These programs are: 10-21-2, 11-02 (for directory dial), 11-04
(for directory dial), 13-04 (for directory dial), 14-04, 15-05, 15-15, 16-02, 23-02, 31-02,
41-02, 41-17, 47-02, 47-03, 82-11, 83-11.
r Some PRG items require second initialization of the KTS before they take effect. These
programs are: 10-12-01, 10-12-02, 10-12-03, 10-12-04, 10-13-01, 10-13-02, 10-13-03,
10-14, 10-15, 10-16-01, 10-16-02, 10-16-03, 10-16-04, 20-01-03, 47-01-01, 80-01,
80-02-01, 80-02-02, 80-02-03, 80-02-04, 80-03, 80-04, 84-03-01, 84-03-02, 84-03-06,
84-03-07, 84-03-08, 84-05-01, 84-05-02, 84-06-01, 84-06-02, 84-06-03, 84-06-04,
84-06-05, 84-06-06, 84-06-07, 84-06-08, 84-06-09, 84-06-10, 84-06-11, 84-09, 84-10.
Default Setting
None
2 - 662
Item
If using IP connections, PCPro needs TCP
port 8000 to be open between the KTS and
the host PC, because communication
between PCPro and the KTS occurs on this
port.
800 x 600 (minimum)
1024 x 760 (recommended)
Item
MS Internet Explorer 6.0 (or higher)
Mozilla Firefox 1.0.3 (or higher)
IP connection to the KTS
800 x 600 (minimum)
1024 x 760 (recommended)
Requirement
Requirement
Electra Elite IPK II
PC Programming