Pulse To Tone Conversion - NEC Electra Elite IPK II Features And Specifications Manual

Electra Elite IPK II
Description
An extension can use Pulse to Tone Conversion on trunk calls. Pulse to Tone Conversion lets a user
change their extension's dialing mode while placing a call. For systems in a Dial Pulse area, this permits
users to access dial-up OCCs (such as MCI) from their DP area. The user can, for example:
Place a call to an OCC over a DP trunk.
J
Depending on programming:
J
Manually implement Pulse to Tone Conversion
- OR -
Wait 10 seconds.
Dial the OCC security code and desired number. The system dials the digits after the conversion
J
as DTMF.
Conditions
Pulse to Tone Conversion is only valid for Dial Pulse trunks (Program 14-02-01, options 0 or 1).
Default Setting
Enabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
COI(4/8)-U10 ETU, COID4/8-U10 ETU, COIB(4/8)-U( ) ETU
- or-
TLI(2)-U( ) ETU
- or-
DTI-U( ) ETU assigned for CO or Tie Line mode

Pulse to Tone Conversion

Pulse to Tone Conversion
Document Revision 1
2 - 685