NEC Electra Elite IPK II Features And Specifications Manual page 338

Document Revision 1
Conditions
r Changing flash patterns for DSS Consoles will also change them for Hotline keys.
When installing a DSS, the system must auto-detect the console in order for the LEDs to
r
function correctly. When connecting the DSS to an extension previously defined with
another circuit type, undefine the circuit type (enter 00 in Program 10-03-01 for the
extension number), then connect the DSS Console.
r Programmable Function Keys for ACD codes (
∗
19) cannot be programmed on a DSS Console.
r Programmable Function keys for Trunk Group (
Appearance (CAP) Key (
does not allow entry of the additional data required for these keys.
r A user can use the One-Touch Programmable Function Key (code 01) to have DSS
Console keys for Personal Speed Dial as well as common and group Speed Dial.
r Lamping status for ACD agents and non-ACD agents do not both appear on the same
console type. For ACD agent's lamping status, a DSS Console must be programmed as an
ACD console in Program 30-01-01. For non-ACD agents, the console must be programmed
as business console.
A DSS key will only indicate a Call Forwarding indication for extensions forwarded with
r
Immediate Call Forwarding.
r A DSS Console can have line keys for placing and answering calls.
The DSS Console provides one-touch calling and a Busy Lamp Field for Door Boxes. Refer
r
to Door Box on page 2-303
The DSS Console provides one-touch Night Service switching. Refer to
r
page 2-617
r Like a One-Touch Key, a user can have DSS Console keys for Direct Station Selection,
Trunk Calling, Personal Speed Dial, Abbreviated Dialing, and Service Code access.
r The DSS Console provides one-touch External and Internal Page zone access. Refer to
Paging, External on page 2-637
You can program the DSS Console keys with service codes to provide the functions of
r
many of the Programmable Function keys. The stored service code can be up to three
digits long, but it can have additional option codes added (e.g. to set Immediate Call
Forward for all calls. Trunk Group (
(CAP) Key (
allow entry of the additional data required."
2 - 316
∗
08) cannot be programmed on a DSS Console as the system
when programming Door Boxes.
when programming Night Service options.
and
∗
08) codes can not be programmed on a DSS Console as the system does not
∗ ∗
10, 12,
∗
02), Virtual Extension (*03), and Call
Paging, Internal on page
∗
02), Virtual Extension (
Direct Station Selection (DSS) Console
Electra Elite IPK II
∗ ∗ ∗ ∗ ∗
13, 14, 15, 16,
Night Service on
2-643.
∗
03), and Call Appearance
∗
17, 18,