NEC Electra Elite IPK II Features And Specifications Manual page 300

Document Revision 1
45-01-01 Voice Mail Integration Options, Voice Mail Department Group Number
Assign which Extension (Department) Group number is to be assigned as the voice mail group.
This program defines the Quick Transfer to Voice Mail destination. An entry of '0' means there
is no voice mail installed.
Department Groups: 0, 1~64
45-01-02 Voice Mail Integration Options, Voice Mail Master Name
Enter the Voice Mail master name up to 12 characters.
45-01-06 Voice Mail Integration Options, Record Alert Tone Interval Time
This timer sets the interval (0~64800 seconds) between Voice Mail Conversation Record alerts.
80-03-01 DTMF Tone Receiver Setup
80-04-01 Call Progress Tone Detector Setup
Use these programs to set the criteria for DTMF dial, ringback and busy tones.
Operation
Calling Your Mailbox
To call your mailbox:
With a multiline terminal, our Voice Mail key and your Message Center keys flash red when they have
messages waiting. If you do not have a Voice Mail key, your MW LED flashes instead.
Multiline Terminal
1. Press your Voice Mail key (PGM 15-07 or SC 751: 77).
- OR -
Press VM Msg softkey.
- OR -
Press the Speaker key and dial the Voice Mail Master Number. After Voice Mail Answers, dial
your mailbox number.
Your mailbox number is normally the same as your extension number. You may optionally dial a co-worker's

mailbox - or use this procedure to call your mailbox from a co-worker's telephone.
- OR -
Press the Speaker key and dial
2. To return a displayed Message Waiting, press the Speaker key or lift the handset.
To listen to the voice messages, with "Voice Message" displayed, press the Speaker key or lift the
handset.
The voice mail is called.

The voice mail is only called if there are new messages. If the display indicates "Check Messages No Messages",

then press the EXIT key to return the telephone to an idle condition.
2 - 278
∗
8.
Electra Elite IPK II
Digital Voice Mail