NEC Electra Elite IPK II Features And Specifications Manual page 248

Hide thumbs Also See for Electra Elite IPK II:
Table of Contents

Advertisement

Document Revision 1
r
An extension with Barge In capability can Transfer a call into an existing Conference. This
would allow, for example, an attendant to locate co-workers and then Transfer them into an
existing telephone meeting. There is no need for the attendant to locate all the parties at the
same time and sequentially add them into the Conference. Transfer Call Into Conference
Code (624).
r
An option is available which allows an extension's Conf key to be programmed for
Conference or for Transfer. When set for Transfer, the user places a call on hold, dials the
extension to which it should be transferred, the presses the Conf key. The call is then
transferred. When set for Conference, with an active call, the user presses the Conf key,
places a second call, then presses the Conf key twice. All the calls are then connected.
r
Users can Barge In on a Conference call if allowed in programming.
r
Define the outgoing call options for each trunk and user.
Set up a Conference with a co-worker in your immediate work area.
r
r
DISA and tie line users may use the Barge In feature on a Conference call if they know the
service code and are permitted in their DISA/Tie Line Class of Service.
Meet Me Conference lets an extension user set up a Conference via Paging.
r
r
Meet Me Paging lets an extension user set up a two-party meeting via Paging.
r
Call Arrival (CAR) Keys (virtual extensions) do not support Conference Programmable
Function keys nor can they be used to add a call to a conference.
r
In order for Multiline Terminal to have Conference, it must have a Conference function key.
r
A user can set up an Unsupervised Trunk-to-Trunk Conference and then drop out of the
call, allowing the remaining parties to continue the conversation. Establish 2 trunk calls
press the HOLD key and dial #8.
r
You can optionally program the Conf (Transfer) key for Transfer. In this case, the Multiline
Terminal must have a Conference function key. The system also allows a call to be
transferred into a Conference call.
Default Setting
Enabled
System Availability
Terminals
All Stations
2 - 226
Electra Elite IPK II
Conference

Advertisement

Table of Contents
loading

Table of Contents