ABB Relion 670 Series Applications Manual page 587

1MRK 511 401-UEN Rev. K
Section 24
24.1 IED identifiers TERMINALID
24.1.1 Application
IED identifiers (TERMINALID) function allows the user to identify the individual IED in the
system, not only in the substation, but in a whole region or a country.
24.2 Product information PRODINF
24.2.1 Application
Product information contains unchangeable data that uniquely identifies the IED.
Product information data is visible on the local HMI under Main menu/Diagnostics/IED
status/Product identifiers and under Main menu/Diagnostics/IED Status/Identifiers:
Product information data is visible on the local HMI under Main menu/Diagnostics/IED
status/Product identifiers and under Main menu/Diagnostics/IED Status/Identifiers.
• ProductVer
• ProductDef
• FirmwareVer
• SerialNo
• OrderingNo
• ProductionDate
• IEDProdType
Figure 279: IED summary
This information is very helpful when interacting with ABB product support (for example
during repair and maintenance).
24.2.2 Factory defined settings
The factory defined settings are very useful for identifying a specific version and very helpful in
the case of maintenance, repair, interchanging IEDs between different Substation Automation
Systems and upgrading. The factory made settings can not be changed by the customer. They
can only be viewed. The settings are found in the local HMI under Main menu/Diagnostics/IED
status/Product identifiers
The following identifiers are available:
• IEDProdType
•
• ProductDef
Bay control REC670
Application manual
Basic IED functions
Use only characters A-Z, a-z and 0-9 in station, object and unit names.
Describes the type of the IED. Example:
© Copyright 2017 Hitachi Power Grids. All rights reserved
GUID-F67243CA-2429-4118-BBFF-3D62BF55E080 v2
GUID-D78786E6-C34A-4E63-9D1E-0582C8F1F7E1 v9
REL670
Section 24
Basic IED functions
IP15060-1 v2
M15324-3 v6
M11789-39 v11
581