1MRK 511 401-UEN Rev. K
Section 3
3.1
Description of configuration REC670
3.1.1
Introduction
3.1.1.1
Description of configuration A30
The configuration of the IED is shown in Figure 2.
This configuration is used in single breaker arrangements with single or double busbar.
Control, measuring and interlocking is fully configured.
The following should be noted. The configuration is made with the binary input and binary
output boards in the basic delivery. In many cases this is sufficient, in other cases, for example
with full control of all apparatuses included, more IO cards are required. Our proposal for a full
version with control is to use two binary input modules and one binary output module.
Bay control REC670
Application manual
Configuration
© Copyright 2017 Hitachi Power Grids. All rights reserved
Section 3
Configuration
IP14799-1 v2
IP14800-1 v1
M15200-3 v8
53