2670 !# HP4062 customization
2680 ! WORKSPACE=3M
2690 ! SHL_SEARCH /usr/pcs/lib
2700 ! SHL_LOAD librmb.sl
2710 ! SHL_LOAD tis.sl
2720 ! SHL_LOAD ast.sl
2730 ! SHL_LOAD sec_check.sl
/usr/pcs/etc/xinitcolor.
### For IMA/UX or '4062UX & IMA/UX'
/usr/bin/X11/xinitcolormap -f /usr/pcs/etc/ima/imacolormap
Conrm that
is placed at beginning of following lines:
#
### For 4062UX on Color display system
#/usr/bin/X11/xinitcolormap -c 16 -f /etc/newconfig/rmb/xrmbcolormap
### For 4062UX on Grayscale display system
#/usr/bin/X11/xinitcolormap -c 16 -f /etc/newconfig/rmb/xrmbgraymap
### For 4062UX with BASIC-PLUS (more than 4 planes color display system)
#/usr/bin/X11/xinitcolormap -f /usr/lib/rmb/PLUS/bplus_colormap
### For 4062UX with BASIC-PLUS (4 planes color display system; See BASIC-PLUS manual)
#/usr/bin/X11/xinitcolormap -f /usr/lib/rmb/PLUS/bplus_cmap.4
### For IMA/UX or '4062UX & IMA/UX'
/usr/bin/X11/xinitcolormap -f /usr/pcs/etc/ima/imacolormap
/usr/pcs/etc/CODEWORD.
/usr/pcs/etc/CODEWORD
1000 ! Please add your CODEWORDs to this file.
1010 ! RE-SAVE "/usr/pcs/etc/CODEWORD:HFS"
1020 !
#1234567890123456
1030 !
#DD6C6BB9A757DCE7
1040 !
#86A1542B408AA511
/usr/pcs/etc/PERCONFIG.
If your system is in a diskless cluster, perform the modications at cluster
Note
server and each diskless cnode.
If your CRT is not 16/19 inch high-resolution (1280
/usr/pcs/etc/PERCONFIG le.
The CRT type, which species the CRT resolution of your controller, is dened in the
PERCONFIG le. The PERCONFIG le is in the /usr/pcs/etc directory.
HP BASIC/UX can use three types of CRTs: 16/19 inch middle-resolution (1024
inch high-resolution (1280
16/19 inch high-resolution CRT.
The default setting of the CRT TYPE in the /usr/pcs/etc/PERCONFIG le is as follows:
1580 !# CRT TYPE
1590 !# CRT TYPE
1600 !# CRT TYPE
1610 !
CRT TYPE
Note that the sharp sign (
Use the VI(1) editor to modify the CRT TYPE setting of this le according your CRT type.
Remove
from the following line to be eective:
#
Add your codeword for HP IMA/UX into the
le.
Example of CODEWORD
ID 2944AXXXXX FOR 4062UX
ID 2944AXXXXX FOR IMA/UX
2
1024), and VGA (Video Graphics Array). The default setting is
: Vga_ws
: Vga_ux
: 1024x768
: 1280x1024
) means comment data entry.
#
(
(
Remove #
(
(
(
(
(
(
2
1024), you must modify the
2
768), 16/19
Software Installation 5-15