Table of Contents
Advertisement
shown, and for 96-pin SWM system, \16366A" and \16366B" is shown. Hewlett-Packard
recommends using the HP 16346B for performance veri cation of the HP 4085B SWM.
Select the desired softkey of the product number according to your system instrument.
For example, if your system is equipped with an HP 4284A CMU84 and a 48-pin SWM,
select the
NNNNNNNNNNNNNNNNNNNNNNNNNN
16346B
d
c
Figure 6-6. Calibration Module Menu Page for 48-pin SWM System
4. Figure 6-7 shows an example of an HP 16346C calibration data entry page. The eld
pointer shows the entry of data and, if it is re-entered, the current data is displayed in
the display area. If you want to change the current data, move the eld pointer using
the arrow keys or the
calibration data, select the
menu page.
Use the same method to enter calibration data for other calibration modules.
6-10 System Verification
and
softkeys and modify both calibration module data.
NNNNNNNNNNNNNNNNNNNNNNNNNN
16346C
key and type in new data and
4 Tab 5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
SAVE/EXIT
4 Return 5
softkey to return to the calibration module
. After entering the
a
b
Advertisement
Table of Contents
