HP 4062UX Installation Manual page 99

Semiconductor process control system semiconductor parametric test system
Table of Contents

Advertisement

Option
022
1
023
/024, 026
/027
1
1
032
033, 034
Option 022, 023, and 026 include the HP-UX system software and HP BASIC/UX system software.
1
CT stands for cartridge tape.
2
This le set is included in HP 4062F software only.
3
DAT stands for digital audio tape.
4
If you install the system software to an HP 4062UX that is con gured in a
Note
diskless cluster, the software must be installed on the root server (
diskless cnode).
When installing the HP 4062UX/F system software and the HP IMA/UX
Note
software, you must install the HP 4062UX/F system software prior to the HP
IMA/UX software.
To load the le sets, perform the following procedure:
1. Log in as a superuser by entering
Login: root
After the
Password:
password that you type is not displayed on your console.
2. To start the UPDATE(1M) utility, enter:
# update
Update starts and displays the main menu. The default source for the update is
/dev/update.src
the
/dev/update.src
manual.
3. Make sure the installation media is set to write-protected state.
4. Insert the installation media into the cartridge tape drive or DAT drive, and wait until
the BUSY indicator turns o .
5. To load all the les from the installation media, Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Select All Filesets on the Source Media ->
and down arrow keys and the
All the les are loaded from the installation media.
6. Remove the installation media, then put it in a safe place.
Table 5-3. File Sets for HP 4062UX/F System
Description
HP 4062UX/F
System Software
C Language Library
root
prompt appears, enter the root password of your system. The
. This procedure assumes that the
setting is not correct, see the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Select Item
Media
CT
4062UX, 4062UX2, 4062RMB,
2
4062DIAG, and 4062F
DAT
4
CT
4062TISC
DAT
after the
prompt as follows:
Login:
/dev/update.src
HP-UX System Administration Tasks
function by using the up
softkey.
File Set
3
on the
not
is set correctly. If
Software Installation 5-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp 4062f

Table of Contents