Creating A New User Account - HP 4062UX Installation Manual

Creating a New User Account

When creating a new user account on your HP 4062UX/F system, you must especially
consider the following. The System Administration Manager (SAM) helps you create a new
user account. The following brie y explains how to create a new user account.
1. Log in as a superuser by entering
Login: root
After the
Password:
password that you type is not displayed on your console.
2. To start the SAM(1M) utility, enter:
# sam
3. Move the eld pointer to \Users and Groups", then select
4. Move the eld pointer to \Users", then select
5. Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Menubar on/off
6. Fill in the elds properly, then select
7. When you are prompted to enter the password, press
account does not need a password. Later the user will set his password. For setting your
password, see
A Beginner's Guide to HP-UX
8. Exit SAM(1M), then log o the HP-UX system.
9. Log in as the new account. For example, if the new account name is \mike," enter
after the
4 Return 5
When you are prompted
TERM = (hp) 98550
10. Copy the X11 environment le \
$ cp /etc/newconfig/rmb/d.Xdefaults ./.Xdefaults
$ chmod u+rw .Xdefaults
11. If you use HP IMA/UX with the HP 4062UX/F system, perform the following steps:
a. Set the proper fonts for HP BASIC/UX. To do so, edit the $HOME
by entering:
$ vi .Xdefaults
and modify as in the following example:
Rmb*font:
The font name depends on the resolution of your graphics display.
b. If your controller is series 700 computer, modify $HOME
set background color for HP BASIC/UX.
rmb*BackGroundColor:
12. Copy a X11 startup le \
5-16 Software Installation
root
prompt appears, enter the root password of your system. The
, then press
4 A 5
prompt.
Login:
TERM = (hp)
.Xdefaults
hp8.10x20
rmb_black
" for the HP 4062UX/F as follows:
.x11start
after the prompt as follows:
Login:
softkey.
NNNNNNNNNNNNNN
Open
(Action) and (Add . . . ) keys.
4 A 5
softkey.
NNNNNNNN
OK
4 Return 5
.
, enter your terminal type. For example, enter:
" for HP BASIC/UX as follows:
softkey.
NNNNNNNNNNNNNN
Open
only. In this stage, the new
/.Xdefaults
le as follows to
/.Xdefaults
mike
le