Pv Test Results Data Entry Page - HP 4062UX Installation Manual

5. The following message is displayed:
Do you want to keep results in a file? (Type CAT to get file catalog)
For performance veri cation after system installation, you should save all
test results to a le. So, select
/usr/pcs/diag/data/PVWO
To not save results to a le, select
To list existing le names, type:
To save results to a le, select the
Type filename. Clear line and press RETURN to cancel.
a. Edit lename using arrow keys if desired.
Do not use same le name as for 4062F DC W DVM or 4062F AC tests. Also, do not
save to present directory (/usr/pcs/diag directory). Hewlett-Packard recommends to
save PV and DIAG results in /usr/pcs/diag/data directory. For example, enter as
follows:
data/PVWO0294
( : Performance Veri cation W/O DVM, February (02) 1994.)
PVWO0294
b. If you entered an existing le name, go to step 6.
If you entered a new le name, a page is displayed (similar to that shown in
Figure 6-33) for entering test information. Follow displayed instructions.
d
c
After you enter the test information, reply to displayed prompt \
select softkey if all information is correct, or
NNNNNNNNNNN
Yes
information.
6-32 System Verification
softkey. Default le name is displayed:
NNNNNNNNNNN
Yes
MonthYear
NNNNNNNN
No
CAT
NNNNNNNNNNN
Yes
4 Return 5
HP 4062F
Semiconductor Parametric Test System
Serial Number
Temperature
4085F SWITCHING MATRIX
4084B SWITCHING MATRIX CONTROLLER
4142B DC SOURCE/MONITOR
4280A C METER/C-V PLOTTER
4284A 20Hz-1MHz PRECISION LCR METER
Slot 1 41421B (SMU1)
Slot 2
Slot 3 41420A (SMU2)
Slot 4 41421B (SMU3)
Slot 5 41421B (SMU4)
Slot 6
Slot 7 41424A (VS1/2,VM1/2)
Slot 8 41425A (AFU)
Tested by ?
aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa
EDIT Continue RUN
Figure 6-33. PV Test Results Data Entry Page
.
softkey. Then, go to step 6.
.
4 Return 5
softkey. The following message is displayed:
Tested by
Date
Humidity
PRESENT Serial Number
PRESENT Serial Number
PRESENT Serial Number
Serial Number
PRESENT Serial Number
Serial Number
Serial Number
Serial Number
Serial Number
Serial Number
Serial Number
Serial Number
Serial Number
User 1
aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa
SCRATCH LOAD "" RE-STORE
""
softkey if you need to re-enter
NNNNNNNN
No
a
1 Feb 1994
Input?
aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa
Delete Link
b
TIS TIS
":
Are you sure?