Pv Test Results Data Entry Page - HP 4062UX Installation Manual

To view the le catalog, enter
To keep the test results, select the
10. The following message is displayed:
Type filename. Press RETURN to cancel.
Enter the lename for the PV test results. Do not specify a le name on the current
directory or on the current exible disk. Hewlett-Packard recommends that you keep the
test results in the /usr/pcs/diag/data or /PCS/DIAG/DATA directory or on a working
copy exible disk. For example, enter as follows:
DATA/PVWO0190
data/PVWO0190
or
PVWO0190:,700,1
The le name \PVWO0190" stands for \Performance Veri cation W/O DVM, January
1990." The DATA or data directory is used to store the PV data or DIAG data.
11. The PV test results data entry page is displayed, similar to that shown in Figure 6-11, for
entering test information. Follow the instructions displayed.
d
c
Figure 6-12 shows an example PV data entry page with test result data. After you
enter the test result data, reply to the displayed prompt: select the
information is correct, or the
.
CAT
4 Return 5
softkey.
NNNNNNNNNNN
Yes
or
4 Return 5
4 Return 5
4 Return 5
Figure 6-11. PV Test Results Data Entry Page
softkey to correct erroneous information.
NNNNNNNNNNNNNN
No
softkey if all
NNNNNNNNNNNNNNNNN
Yes
System Verification 6-13
a
b