Hp 9000 Series 300 Hardware Installation; Backplane Expander; Random Access Memory (Ram) - HP 4062UX Installation Manual

Semiconductor process control system semiconductor parametric test system
Table of Contents

Advertisement

HP 9000 Series 300 Hardware Installation

If the system controller is an HP 9000 Series 300 Model 345, proceed to \ID
Note
Module" because you cannot add accessories to these computer models.
If the system controller is an HP 9000 Series 300 Model 340, 360, 370, 375, 380, 382,
or R/382, the computer needs additional accessories, and may include several optional
accessories, depending on the system software con guration and memory requirements. The
following paragraphs brie y describe the accessories and installation. For any accessories that
are not described in the following paragraphs, see the
Before you install or remove any computer accessory, turn the computer
Caution
OFF and unplug its power cord. Failure to do so may result in computer or
accessory damage.

Backplane Expander

To install an HP 98568A, HP 98568A Option 132, or HP 98570A Backplane Expander
into the system controller, refer to the HP 98568A/98570A
number 98568-90603, and so on), or to the computer
B1862-90007), Volume 1, Chapter 4, for complete installation information.
To install an HP A2246A DIO-I Bus Expander on the model 362 or 382, refer to the
Installation Guide; Model 362/382 Controller and HP A2246/7 Bus Expanders
number A1473-90010).

Random Access Memory (RAM)

The system controller is shipped with random access memory (RAM) by ordered options.
If the system controller needs additional RAM cards (HP 98256A, 98257A, 98258A/B/C,
98264A/B, 98267A/B/C, and so on), you must install RAM cards by yourself.
For complete RAM card installation information, refer to step 4, \Installing Memory and I/O
Expander" in
Installing Peripherals
cards.
Many RAM card components are static-sensitive. Handle RAM cards by using
Caution
their antistatic envelopes. Do not touch the electrical traces on the card and
never lay a card on a statically charged surface.
Installation Note
Installing Peripherals
, and to the installation note furnished with the RAM
of the accessories.
(HP part
Installation Note
(HP part number
(HP part
System Controller Installation 2-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp 4062f

Table of Contents