Displaying And Printing Test Results; Displaying Pv Test Results; Example Page Of View Result (Crt) - HP 4062UX Installation Manual

Displaying and Printing Test Results

If the PV test results were saved during the tests, you can use the View Result function of the
PV4062.F to see the test results. You can display the test results on the controller monitor
or print them on the system printer. The following describes procedures for displaying and
printing test results:

Displaying PV Test Results:

1. From the PV4062.F main menu page (Figure 6-4), select the
View Result Start page is displayed.
2. Select the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
READ FILE
3. Enter the name of the le that contains the PV test results. For example, using the le
name in step 5 of the 4062F DC W/O DVM test, type:
4. Select the
softkey to display test results. A page similar to Figure 6-25 is displayed.
NNNNNNNNNNN
CRT
Select the softkey to display the next page of test results.
NNNNNNNNNNNNNN
MORE
d
===============================================================================
===============================================================================
Test Facility:
Hewlett-Packard
_________________________________
_________________________________
_________________________________
HP 4062F:
Serial No. ____________JP10B00101
Firmware Revision _______________
aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa
c
softkey to obtain PV test results.
P E R F O R M A N C E T E S T
Figure 6-47. Example Page of View Result (CRT)
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
VIEW RESULT
data/PVWO0294
R E C O R D
Report No. ______________________
Date _________________10 Feb 1994
Customer ________________________
Tested by _________Cheryl Jenkins
Temperature _______________23.4 C
Humidity ____________________53 %
User 1 Running
aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa
MORE
System Verification 6-45
softkey. The
.
4 Return 5
a
EXIT
b