d
c
20. The CMU84 C-G Test is performed. For the 48-pin SWM, make sure that the HP 16346C
Calibration Module is installed on the SWM. For the 96-pin SWM, make sure that the HP
16366B Calibration Module is installed on the SWM.
When the test nishes, test results are displayed as shown in Figure 6-22.
d
c
21. Select the
NNNNNNNNNNNNNN
NEXT
results are displayed as shown in Figure 6-23.
Figure 6-21. CMS Bias Test Results Page for HP 4280A
Figure 6-22. CMU84 C-G Test Results page for HP 4284A
softkey to start the CMU84 Bias Test. When the test nishes, test
System Verification 6-19
a
b
a
b