Installing the HP 8110A
To install the HP 8110A into the HP 4062F system cabinet, refer to Figure 4-10 and perform
the following procedure:
1. Slide the HP 8110A into the system cabinet, and t to the inside panel.
2. Secure the rack
anges of the HP 8110A to the system cabinet using the furnished washers
(3) and (4) and screws (2).
3. Connect the HP 8110A to the PDU with the power cable (5).
4. Connect the trigger cables between the installed HP 8110As. Figure 4-11 shows the trigger
cable connections.
Figure 4-9. Attaching Rack Flanges to HP 8110A
Figure 4-10. Installing the HP 8110A
System Installation 4-21