Installing the HP 4280A
To install the HP 4280A into the HP 4062 system cabinet, refer to Figure 4-5 and perform the
following procedure:
1. Slide the HP 4280A into the system cabinet.
2. Secure the left rack
ange of the HP 4280A to the system cabinet using the furnished
washers (4) and (5) and screw (3).
3. Secure the right rack
ange of the HP 4280A to the system cabinet using the furnished tie
mounts (6) and screw (3), and install the cable ties through the tie mounts.
4. Connect the HP 4280A to the PDU with the power cable.
Figure 4-4. Attaching Rack Flanges to the HP 4280A
System Installation 4-13