Test Lead Connections For Short Correction - HP 4062UX Installation Manual

Figure 6-9. Test Lead Connections for SHORT Correction
After the OPEN and SHORT corrections, connect the test leads to the SWM using the
BNC-BNC cables and the BNC f-to-f adapters.
7. Select the
NNNNNNNNNNNNNNNNN
Start
is displayed.
d
c
8. Press
4 Shift 5 4 Menu 5
adapter is installed on the SWM, and select the
W/O DVM subtests sequentially.
9. The following message is displayed:
Do you want to keep results in a file? (Type CAT to get file catalog)
To continue testing without keeping test results, select the
11. Note, however, that Hewlett-Packard recommends that you save all test results for
future reference.
6-12 System Verification
softkey. The 4062UX W/O DVM test menu page similar to Figure 6-10
Figure 6-10. 4062UX W/O DVM Menu Page
to display additional softkeys. Be sure the (empty) test xture
softkey to perform all 4062UX
NNNNNNNNNNNNNNNNN
SEQ
softkey and proceed to step
NNNNNNNN
No
a
b