Table of Contents
Advertisement
3e. Cache miss (with copy-back/write-back)
The tag and data field of the cache line indexed by effective address bits [13:5] are first saved
in the write-back buffer, and then a data write in accordance with the access size
(quadword/longword/word/byte) is performed for the data indexed by bits [4:0] of the effective
address of the data field of the cache line indexed by effective address bits [13:5]. Then, data is
read into the cache line from the external memory space corresponding to the effective
address. Data reading is performed, using the wraparound method, in order from the longword
data corresponding to the effective address, and one cache line of data is read excluding the
written data. During this time, the CPU can execute the next processing. When reading of one
line of data is completed, the tag corresponding to the effective address is recorded in the
cache, and 1 is written to the V bit and U bit. The data in the write-back buffer is then written
back to external memory.
4.3.4
Write-Back Buffer
In order to give priority to data reads to the cache and improve performance, the SH7750 Series
has a write-back buffer which holds the relevant cache entry when it becomes necessary to purge a
dirty cache entry into external memory as the result of a cache miss. The write-back buffer
contains one cache line of data and the physical address of the purge destination.
Physical address bits [28:5]
4.3.5
Write-Through Buffer
The SH7750 Series has a 64-bit buffer for holding write data when writing data in write-through
mode or writing to a non-cacheable area. This allows the CPU to proceed to the next operation as
soon as the write to the write-through buffer is completed, without waiting for completion of the
write to external memory.
LW0
Figure 4.4 Configuration of Write-Back Buffer
Physical address bits [28:0]
Figure 4.5 Configuration of Write-Through Buffer
LW1
LW2
LW3
LW0
LW4
LW5
LW6
LW1
Rev. 6.0, 07/02, page 105 of 986
LW7
Advertisement
Chapters
Table of Contents
