Hitachi SH7750 Hardware Manual page 189

(4) Instruction TLB Multiple-Hit Exception
• Source: Multiple ITLB address matches
• Transition address: H'A000 0000
• Transition operations:
The virtual address (32 bits) at which this exception occurred is set in TEA, and the
corresponding virtual page number (22 bits) is set in PTEH [31:10]. ASID in PTEH indicates
the ASID when this exception occurred.
Exception code H'140 is set in EXPEVT, initialization of VBR and SR is performed, and a
branch is made to PC = H'A000 0000.
In the initialization processing, the VBR register is set to H'0000 0000, and in SR, the MD,
RB, and BL bits are set to 1, the FD bit is cleared to 0, and the interrupt mask bits (I3–I0) are
set to B'1111.
CPU and on-chip peripheral module initialization is performed in the same way as in a manual
reset. For details, see the register descriptions in the relevant sections.
TLB_multi_hit()
{
TEA = EXCEPTION_ADDRESS;
PTEH.VPN = PAGE_NUMBER;
EXPEVT = H'00000140;
VBR = H'00000000;
SR.MD = 1;
SR.RB = 1;
SR.BL = 1;
SR.(I0-I3) = B'1111;
SR.FD = 0;
Initialize_CPU();
Initialize_Module(Manual);
PC = H'A0000000;
}
Rev. 6.0, 07/02, page 139 of 986