NEC UNIVERGE SV8300 Command Manual page 107

COMMAND CODE TITLE:
08
517 Encoding method for the password
NOTE:
Effective when CM08>515 is set to 1.
519 Whether the system sends SPDT when entering the name/num-
ber for Dial by Name
521 PS Location Indication on DESKCON display
[8300R2]
522 Provide the Privacy Release feature which does not use My line
of the third party
524 Send calling party name to the analog telephone for Caller ID-
Station when an internal call is terminated
NOTE:
This data is effective only when the 2nd data of CM12
Y=20 is set to 1.
[North America Only]
525 Sending Switch Hook Flash for Adjunct Analog System
527 Provide the system with the voice communication between
ISDN telephone group and Single Line Telephone/Multiline
Terminal/PS within the system
528 Station Hunting when ISDN telephone break down
NOTE: Waiting Timer for call/answer needs to be set by
CMAC Y=15 when providing Station Hunting
534 System operation after the C.O./Tie line (via TRK-B) is com-
pleted when a station that has a C.O./Tie line call (via TRK-A)
on consultation hold is talking with another C.O./Tie line call
(via TRK-B)
538 Duration of displaying the destination information (dialed num-
ber/name) indicated on the Multiline Terminal when the outgo-
ing call is answered by the destination (except CCIS)
NOTE:
Set this data by CM08>580 when making a call via
CCIS.
542 Type of Camp-On from DESKCON
[8300R2]
BASIC SERVICES
BASIC SERVICE
0 MD5
1 NEC Original method
0 Not sent
1 To send
0 To provide
1 Not provided
0 To provide
1 Not provided
0 To send
(Calling Party Name is sent)
1 Not sent
(Calling Party Number is sent)
0 To send
1 Not sent
0 To provide
1 Not provided
0 To provide
1 Not provided
0 Return to the original call
(via TRK-A)
1 ROT
0 Until call is finished
1 6 seconds
0 Semi-Automatic Camp-On
1 Automatic Camp-On
3-58
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.3.0
91ch3001.fm
NOVEMBER/12/2008
CM08