NEC UNIVERGE SV8300 Command Manual page 345

COMMAND CODE TITLE:
42
1ST DATA
DATA
195 Time to lock the DT700 Series when number
of password entries exceeded the limit
NOTE: When the DT700 Series is in password lock state, a password entry is restricted until the time set by
this command is elapsed.
198 Volume Control (Side Tone level) of DT300/
DT700 Series
NOTE:
For the volume control (Side tone level) of the Multiline Terminal/DESKCON, set the data by
CM42>68.
199 Volume Control of Desk Console (Sending
level)
[8300R2]
NOTE: In usual operation, do not change the default data.
200 Volume Control of Desk Console (Receiving
level)
[8300R2]
NOTE: In usual operation, do not change the default data.
804 Masked Digits of an outgoing call number in
Immediate Printout Call Record/Station indi-
vidual Call Record Print/Call Charge Printout
of a long-time call
[8300R2]
CODEC LIST
MEANING
2ND DATA
DATA MEANING
00 Not unlocked
01 1 minute
99 99 minutes
NONE 10 minutes
00 -54 dB
01 -48 dB
32 -18 dB
NONE -18 dB
00 Level 00 (Low Level)
31 Level 31 (High Level)
NONE The default data is different
depending on the specifications of
each country.
00 Level 00 (Low Level)
31 Level 31 (High Level)
NONE The default data is different
depending on the specifications of
each country.
01 1 digit
15 15 digits
NONE All digits printed
3-296
CM42
: Default
REMARKS
CM42>68
Continued on next page
NWA-033623-001 Rev.3.0
91ch3004.fm
NOVEMBER/12/2008