NEC UNIVERGE SV8300 Command Manual page 292

COMMAND CODE TITLE:
35
Y
No. MEANING
164 Multiline Terminal Ringer
Tone Pattern on incoming
calls
Multiline Terminal ringer tone pattern is assigned by the following combination of CM35 Y=034 and 164.
Y=34
0 Ringer Tone Pattern 3
1 Ringer Tone Pattern 6
2 Ringer Tone Pattern 5
3 Ringer Tone Pattern 4
NOTE: For the Ringer Tone Pattern, see
169 Sending Switch Hook Flash
for Adjunct Analog System
170 DID Development Table
NOTE: For SIP trunk, this data is available only for the Development Table.
171 Number of digits to be con-
verted on DID for Develop-
ment Table 1
172 Number of digits to be
received for Development
Table 1
173 Call Forwarding-All Calls
on Attendant Overflow
[8300R2]
174 CID Call Routing for non-
DID on ISDN, Caller ID
TRUNK ROUTE DATA
DATA
0 See below
1
Y=164: 0
CM65
0 To send
1 Not sent
0 Development Table 1
3 Development Table 0
01-08 1-8 digits
15 4 digits
01-14 1-14 digits
15 4 digits
0 Available
1 Not available
0 To provide (Using Development Pattern 0)
1 To provide (Using Development Pattern 1)
2 To provide (Using Development Pattern 2)
3 Not provided
SETTING DATA
MEANING
: Default
Y=164: 1
Ringer Tone Pattern 0
Ringer Tone Pattern 1
Ringer Tone Pattern 2
Ringer Tone Pattern 7
Y=40.
3-243
CM35
: Default
RELATED
COMMAND
CM35 Y=034
CM76 Y=00, 90
CM35 Y=170
CM76 Y=90
CM35 Y=170
CM76 Y=90
CM51 Y=31
CM2A Y=50-52
Continued on next page
NWA-033623-001 Rev.3.0
91ch3003.fm
NOVEMBER/12/2008