NEC UNIVERGE SV8300 Command Manual page 301

COMMAND CODE TITLE:
35
Y
No. MEANING
276 ISDN Alternative Routing
for Remote Unit in survival
mode when receiving trunk
call
277 Call Completion to Busy
Subscriber (CCBS) for a call
originating office
[For EU]
278 Call Completion to Busy
Subscriber (CCBS) for a call
termination office
[For EU]
279 Pattern number for adding
an access code for outgoing
call to the calling number
stored by Message Reminder
when terminating a tandem
call via CCIS
286 Registering a fault
information when a long call
duration of trunk call occurs
289 Setting of PAD data from a
trunk to a station
See PRECAUTION (3)
NOTE 1:
This command is effective for the following trunks.
- LDT/ODT/PRT/DTI/CCT/SIP/IPT (P2P CCIS)
NOTE 2:
For PAD data from a BRT to a station, 0 (Transmit) and -6 (Receive) is set as a fixed PAD data.
TRUNK ROUTE DATA
DATA
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Pattern No. 0
7 Pattern No. 7
NONE No data
0 Not registered
1 To register
01 -15 dB
15 -1 dB
16 0 dB
17 +1 dB
31 +15 dB
NONE 0 dB
+: Gain
- : Loss
SETTING DATA
MEANING
(1 dB increment)
(1 dB increment)
3-252
CM35
: Default
RELATED
COMMAND
CM50 Y=11
CM42>182
CMEA Y=2>04A
Continued on next page
NWA-033623-001 Rev.3.0
91ch3003.fm
NOVEMBER/12/2008