NEC UNIVERGE SV8300 Command Manual page 291

COMMAND CODE TITLE:
35
Y
No. MEANING
155 Calling party number is used
as the ID Code for Remote
Access to System (DISA)
156 Calling Name Display for
incoming call from ISDN/
T1-ANI/MFC-R2 route
158 Release of ISDN trunk when
receiving the ISDN DIS-
CONNECT message with
Progress Description=08
from ISDN (effective for an
outgoing call to ISDN)
NOTE:
When sending the in-band tone to the calling station from ISDN, set the second data to 1.
In this case, the ISDN trunk will be released automatically in 30 seconds after the calling station re-
ceives the in-band tone or when the calling station goes on-hook.
161 DS code point (DiffServ
code point) for SIP trunk
voice packet
NOTE 1:
Set this data when the router provides DiffServ QoS, if required.
DiffServ: Differentiated Services; one type of QoS.
QoS: Quality of Service
NOTE 2: When this data is set, the TOS field Precedence set by CM35 Y=134 is ineffective.
If you want to validate the Precedence set by CM35 Y=134, set "CCC" (data clear) for CM35 Y=161.
NOTE 3: This data setting is required only for Point-to-Multipoint connection.
TRUNK ROUTE DATA
DATA
0 Available
1 Not available
NOTE:
0 1000-Slot Memory Block No. 03
1 1000-Slot Memory Block No. 02, 03
3 Not provided
0 To release
1 Not released
00-3F DS code point
NONE No data
SETTING DATA
MEANING
Assign this data only for Ring down
connection.
3-242
CM35
: Default
RELATED
COMMAND
CM2A Y=15, A0
CM15 Y=136
CM35 Y=134
CM41 Y=2>38
Continued on next page
NWA-033623-001 Rev.3.0
91ch3003.fm
NOVEMBER/12/2008