NEC UNIVERGE SV8300 Command Manual page 183

COMMAND CODE TITLE:
12
Y
No. MEANING
92 MAC Address registration
in Fixed Connection Mode
NOTE 1: A maximum of 256 MAC Addresses can be registered in Fixed Connection Mode.
NOTE 2: This command has to be registered after assigning CM15 Y=480 2nd data "1" and CM2B Y=00 in
Fixed Connection Mode. If you do not do that, "DATA ERROR" is displayed.
NOTE 3:
When a MAC Address is entered during the terminal logging in incorrectly, "DATA ERROR" is dis-
played. When a MAC Address of the other terminals which is logging in is entered, "WAIT, BUSY
NOW" is displayed.
NOTE 4:
Execute the system data backup by CMEC Y=6>0: 0 after this command registered.
When changing this data of terminals accommodated in a Remote Unit, execute the system data copy
by CMEC Y=8 to the Remote Unit.
93 Protection Mode Cancel
(forced) for DT700 Series
NOTE:
When entering "CCC", regardless of the result, "OK" is displayed immediately.
STATION CLASS-1
DATA
X.....XXX MAC Address
(12 digits)
CCC Clear
NONE No data
1 Always displayed when the DT700 Series is pro-
tected
CCC To cancel (forced)
SETTING DATA
MEANING
3-134
CM12
: Default
RELATED
COMMAND
NWA-033623-001 Rev.3.0
91ch3002.fm
NOVEMBER/12/2008