NEC UNIVERGE SV8300 Command Manual page 117

COMMAND CODE TITLE:
08
817 OAI SMFN STS (status) when the forwarded call with Call
Forwarding-All Calls/Busy Line/No Answer is terminated to a
station via CCIS (SMFN FID=1)
OAI SMFN STS (status) when a station answers via CCIS the
forwarded call with Call Forwarding-All Calls/Busy Line/No
Answer (SMFN FID=2)
818 Send OAI SMFN when Exclusive Hold
[For EU]
820 Display of the monetary unit for ISDN call charge
NOTE: When setting the second data to 1 and CM04 Y=00>00 is set to 01-31, $ is displayed.
Set this command when monetary unit is not displayed in the area where a dollar is not used.
823 SMDR service for incoming calls of each station assigned by
CM13 Y=05
NOTE: To provide SMDR for abandoned incoming calls, as-
sign second data of CM08>823 to 0 (Ineffective).
824 DID Development Table for guest station
NOTE:
Set the second data the same as the DID Development Table number assigned by CM35 Y=170.
825 Number of digits for a sequence used to communicate with the
PMS
826 Timing that the system sends a recovery process request to the
PMS
827 Parity check for CPU Built-in SMDR on IP
828 Kind of parity for CPU Built-in SMDR on IP
BASIC SERVICES
BASIC SERVICE
0 SMFN STS=4/5/6
1 SMFN STS=0
0 SMFN STS=5/6/7
1 SMFN STS=0
0 To send
1 Not sent
0 Monetary unit is not displayed
1 As per CM04 Y=00>00
0 Ineffective
1 Effective
0 Development Table 1 for DID number
assigned by CM76 Y=90
1 Development Table 0 for DID number
assigned by CM76 Y=00
0 3 digits (000-199)
1 2 digits (00-99)
0 At every connection establishment
1 At the first connection establishment
only since system reset
0 None parity
1 Parity as for CM08>828
0 Odd parity
1 Even parity
3-68
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.3.0
91ch3001.fm
CM08