[Cm57] Group Call - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
57
FUNCTION:
This command is used to assign the Group Call numbers and stations for Group Call by Pilot Number
Dialing.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST + + DE
57YY
DATA TABLE:
Y
No. MEANING
10 Group Call No. 00-19
29
NOTE 1:
The maximum number of simultaneous calling for single line stations/PSs Stations is 12 per chassis.
When the number of single line stations/PSs Stations exceeds 12, allocate the rest of stations to anoth-
er chassis. For a Multiline Terminal (My Line/Virtual Line), there is no limit as the above.
NOTE 2:
Set the second data to the station number that is set by CM10 when PSs are used.
NOTE 3:
Maximum of 32 stations per Group Call can be assigned (However, maximum of 5 PSs can be as-
signed for PSs).
30 Specification of the
My Line number that
displays the calling
number
NOTE: The number of stations that can display the calling number on LCD is maximum 8 per tenant. Set the
allocation number to the stations that displays the calling number.
31 Serial number within
the group
[8300R2]
32 Pilot station for the
outgoing call
[8300R2]
GROUP CALL
1ST DATA
+ + DE
(2/4 digits)
1ST DATA
DATA MEANING
00 Serial No. 00-31
within the group
31
XX YY XX: Tenant No. 00-63
YY: Allocation No.
00-07
XX YY XX: Conference
Group No. 00-15
YY: Serial No. 00-15
(within the Con-
ference group)
XX Conference Group No.
00-15
2ND DATA
+ + EXE
(1-8 digits)
DATA
X-XXXXXXXX
NONE
NOTE
X-XXXXXXXX
X-XXXXXXXX
NONE
X-XXXXXXXX
NONE
3-340
: Default
2ND DATA
MEANING
Station No.
No data
My Line No.
Station No.
No data
Station No.
No data
NWA-033623-001 Rev.3.0
91ch3005.fm
NOVEMBER/12/2008
CM57