COMMAND CODE TITLE:
4A
FUNCTION:
This command is used to assign the schedule of Day/Night Mode Change by System Clock.
PRECAUTION:
(1)
For the normal operation of Day/Night Mode Change by System Clock, Day/Night Mode Change
by the external key, by service access code or feature key, by Attendant Console should not be
executed.
(2)
Trunk Restriction Class can be changed according to the schedule of Day/Night Mode Change by
System Clock. This is assigned by CM65 Y=36 and available for two kinds of mode (Day Mode/
Night Mode only).
(3)
If takes approximately 4 to 8 seconds, to change the mode after the setting time.
ASSIGNMENT PROCEDURE:
ST
+ 4AYY +
DE
DAY/NIGHT MODE CHANGE BY SYSTEM CLOCK
1ST DATA
+
(1-4 digits) +
DE
2ND DATA
+
+ EXE
(2 digits)
3-318
CM4A
NWA-033623-001 Rev.3.0
91ch3004.fm