NEC UNIVERGE SV8300 Command Manual page 199

COMMAND CODE TITLE:
15
Service Restriction Class A
No.
400 Displaying pattern of Caller ID on the LCD of Multiline Ter-
minal before answering or after answering a trunk call
NOTE 1: When the second data of CM15 Y=400 is set to 0, set the second data of CM15 Y=136 to 1 (Calling
Name Display).
NOTE 2: When the second data of CM15 Y=400 is set to 1, set the second data of CM15 Y=136 to 0 (Calling
Number Display).
401 Entry of Authorization Code/Forced Account Code after dial-
ing an LCR access code and desired number
NOTE:
To provide this operation, the following data assignments are required.
- Toll restriction
(CM12 Y=01, CM8A Y=5XXX: 000, CM81)
- LCR origination
(CM20: A126/A127/A128/A129, CM8A Y=5XXX: 180, CM85)
SERVICE RESTRICTION CLASS A
Y
MEANING
SERVICE
REST.
CLASS (A)
00
15
00
15
3-150
: Default
SETTING DATA
DATA MEANING
0 To display calling
number on upper line
of LCD, calling name
on middle line of LCD
1 To display calling
name on upper line of
LCD, calling number
on middle line of LCD
7 Not displayed calling
number and calling
name simultaneously
0 Allow (Authorization
Code)
1 Allow (Forced
Account Code)
2 Allow (Authorization
Code [PAD LOCK])
7 Restricted
NWA-033623-001 Rev.3.0
91ch3002.fm
JULY/18/2008
CM15